Product Description

  • Manufactured within GreenSource Initiative™guidelines.
  • Manufactured using renewable solar energy, produced onsite.
  • Returnable to manufacturer at end of life to ensure cradle-to-cradle handling.
  • Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements.
  • Furnished in Copper-Free Aluminum (Type 6061-T6).
  • Fully machined from solid billet.
  • Unibody design provides enclosed, water-proof wireway and integral heat sink for maximum component life.
  • Integral knuckle for maximum mechanical strength.
  • High temperature, silicone ‘O’ Ring provides water-tight seal.
  • Patented 360HD™ Mounting System features a mechanical taper-lock, which allows a full 180° vertical adjustment without the use of serrated teeth, which inherently limit aiming.
  • High temperature, silicone ‘O’ Ring provides water-tight seal and compressive resistance to maintain fixture position. Design withstands 73 lb. static load prior to movement to ensure decades of optical alignment. 1/2″ pipe thread for mounting. Biaxial source control additionally provides 360° horizontal rotation in addition to vertical adjustment.
  • ’Aim-And-Lock’ Technology allows precision adjustment without the redundant tightening and loosening of knuckle screw.
  • Fully machined cap. Accommodates [2] lens or louver media.
  • Choose from 45° cutoff (‘A’ or ‘D’), 1” deep bezel with 90° cutoff (‘B’ or ‘E’) or flush lens (‘C’) cap styles. ‘A’ and ‘B’ caps include weep-hole for water and debris drainage. ‘D’ and ‘E’ caps exclude weep-hole and are for interior use only.
  • Shock resistant, tempered, glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment.
  • BKSSL™ Integrated solid state system with ‘x’ technology is scalable for field upgrade.
  • Modular design with electrical quick disconnects permit field maintenance.
  • LM-80 certified. Minimum 50,000 hour rated life at 70% of initial lumens (L70).
  • BKSSL technology provides long life, significant energy reduction and exceptional thermal management.
  • Color corrected cold phosphor technology delivers near-perfect natural white light. Long term phosphor maintenance over product life. Exact color point conformity exceeds ANSI C78.377 standard. Provides uniform beam with no color variation over angle. Module exceeds 80 CRI (RA>80, R9>16).
  • Remote Driver For use with remote LED driver. See remote driver submittal to determine remote distance and wiring requirements prior to detailing field installation of any remote wiring.
  • Interchangeable OPTIKIT™ modules permit field changes to optical distribution.
  • Teflon® coated, 18AWG, 600V, 250° C rated and certified to UL 1659 standard.
  • Tamper-resistant, stainless steel hardware.
  • 360HD™ hardware is additionally black oxide treated for additional corrosion resistance.
  • Exclusive StarGuard®, a RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating.
  • 5 year limited warranty.
  • ITL tested to IESNA LM-79.
  • Lighting Facts listed.
  • ETL Listed to ANSI/UL Standards 1598, 8750 and Certified to CAN/CSA Standard C22.2 No. 250.
  • RoHs compliant.
  • Suitable for indoor or outdoor use.
  • Suitable for use in wet locations.
  • Additionally suitable for installation within 4’ of the ground.
  • IP66 Rated.
  • Made in USA.