Product Description

  • Manufactured within GreenSource Initiative™guidelines.
  • Manufactured using renewable solar energy, produced on site.
  • Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensourcefor program requirements.
  • Faceplate is 1/2″ solid machined 6061T6 copper-free aluminum with (5) black oxide, captive, stainless steel mounting screws. Housing Corrosion-free composite, made from high strength, thermoformed, sheet molded polyester compound. Glass reinforced, flame retardant and UV stabilized. (2) Bottom-Entry, 3/4″ NPT female conduit entries with knockout plugs and (4) side flats for 1/2″ or 3/4″ conduit adapters.
  • Patented Stability Flange projects into installation substrate to reinforce housing stability. Integral REBAR saddles simplify installation onto concrete form. (4) Orthogonal bosses permit use of ½” PCV conduit or EMT to simplify vertical position and leveling of housing. Pre-set selftapping screws anchor housing at proper elevation.
  • For direct burial in soil or concrete. Consult Drainage Installation Guide for In-Grade Fixtures (DIG-IT) for compliance with proper soil preparation and drainage requirements prior to installation. Fixtures are controlled using a wireless light commissioning tool, traditional 0-10V industry wired controls, or a hybrid of wired and wireless controls.
  • 0-10V Wired Control requires [2] two sets of 0-10V industry wired controls. One 0-10V control provides CCT modulation between 2700K through 6000K in 1% increments. The second 0-10V control enables 5-100% dimming in 1% increments.
  • Wireless Light Commissioning Tool, specified separately. Remote operates at 2.4Ghz. Detects all fixtures within range of its wireless network (approx. 10m range). Permits individual on/off control, 5-100% dimming (1% increments), CCT modulation between 2700K through 6000K. Full saturation and hue control enables selection of any single color point off the Planckian curve for dynamic full color output. A copy/paste function permits replication of the current selection to other modules within the wireless network.
  • Hybrid Control for 0-10V industry wired installations, the Light Commissioning Tool may also be utilized to select a single color point off the Planckian curve for dynamic full color output with the remaining functions enabled by the 0-10V controls.
  • Driver Assembly [1] 1.75A, Class A (Sound), Class II (Isolation) driver. 120VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <20% THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection. Dimming driver for use with 0-10V wired controls when installed for use with 0-10V Wired Control or Hybrid Control Arraya™ modules.
  • Self Evacuating Airtight Lamp Module (S.E.A.L.™). IP-68 rated, vacuum sealed enclosure.
  • Patented Anti-Condensation Valve (ACV™) eliminates condensation on interior components. High temperature silicone ‘O’ Ring at faceplate.
  • Patented HydroLock® technology provides fail safe water barrier between junction box and interior components.
  • Antisiphon valve (ASV™) prevents “wicking” through conductor insulation.
  • Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to UL1659 standard. OptiLock® and gear tray quick disconnects. [3] Water-Tight connectors supplied for line connection. Maximum [2] #10 & [1] #18. Minimum [1] #12 & [1] #18.
  • StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating. Finish to match fixture (specified separately.)
  • 5 year limited warranty.
  • IP-68 Rated Enclsosure. ETL Listed to ANSI/UL Standard 1598 and Certified to CAN/CSA Standard C22.2 No. 250.
  • RoHs compliant.
  • Made in the USA.