Product Description

  • Manufactured within GreenSource Initiative™guidelines.
  • Manufactured using renewable solar energy, produced on site.
  • Returnable to manufacturer at end of life to ensure cradle to-cradle handling. Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensourcefor program requirements.
  • Furnished in Copper-Free Aluminum (Type 6061-T6).
  • Tree Installation Tree Strap™ mounting system facilitates non-invasive installation. Adjustable nylon strap is mold and mildew resistant and will not hinder tree growth. Removeable bottom with Neoprene gasket. 2-1/2″ I.D. slip fitter. Accepts 360SL™ and360HD™ patented adjustable mounting systems, allows rotational adjustment with “O”-ring seal and tamperproof design.
  • Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to UL1659 standard. Pre-wired and labeled terminal strip.
  • Fixtures are controlled using a wireless light commissioning tool, traditional 0-10V industry wired controls, or a hybrid of wired and wireless controls. 0-10V Wired Control Requires [2] two sets of 0-10V industry wired controls. One 0-10V control provides CCT modulation between 2700K through 6000K in 1% increments. The second 0-10V control enables 5-100% dimming in 1% increments. Light
  • Wireless Light Commissioning tool, specified separately. Remote operates at 2.4Ghz. Detects all fixtures within range of its wireless network (approx. 10m range). Permits individual on/ off control, 5-100% dimming (1% increments), CCT modulation between 2700K through 6000K. Full saturation and hue control enables selection of any single color point off the Planckian curve for dynamic full color output. A copy/paste function permits replication of the current selection to other modules within the wireless network.
  • Hybrid Control for 0-10V industry wired installations, the Light Commissioning Tool may also be utilized to select a single color point off the Planckian curve for dynamic full color output with the remaining functions enabled by the 0-10V controls.
  • Driver [1] 1.75A, Class A (Sound), Class II (Isolation) driver. 120VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <20% THD (nominal at 120VAC full load). Output over-voltage, over-current, and short circuit protection. Dimming driver for use with 0-10V wired controls when installed for use with 0-10V Wired Control or Hybrid Control Arraya™ modules.
  • StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating.
  • 5 year limited warranty.
  • ETL Listed to ANSI/UL Standard 50/50E and Certified to CAN/CSA Standard C22.2 No. 250.
  • RoHs compliant.
  • Made in USA