Product Description

  • Manufactured within GreenSource Initiative™guidelines.
  • Metal and packaging components are made from recycled materials.
  • Manufactured using renewable solar energy, produced on site.
  • Returnable to manufacturer at end of life to ensure cradleto-cradle handling.
  • Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consultwww.bklighting.com/greensource for program requirements.
  • Furnished in Copper-Free Aluminum (Type 6061-T6).
  • Fully machined from solid billet. Unibody design provides enclosed, water-proof wireway and integral heat sink for maximum component life. High temperature, silicone ‘O’ Ring provides water-tight seal.
  • Caps are fully machined. Accommodates [2] lens or louver media. Choose from 45° cutoff (‘A’ or ‘D’), 1″ deep bezel with 90° cutoff (‘B’ or ‘E’) or flush lens (‘C’) cap styles. ‘A’ and ‘B’ caps include weep-hole for water and debris drainage. ‘D’ and ‘E’ caps exclude weep-hole and are for interior use only.
  • Shock resistant, tempered, glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment.
  • Integrated solid state system with ‘x’ technology is scalable for field upgrade. Modular design with electrical quick disconnects permit field maintenance.
  • LM-80 certified.
  • Minimum 50,000 hour rated life at 70% of initial lumens (L70). BKSSL technology provides long life, significant energy reduction and exceptional thermal management.
  • Corrected cold phosphor technology delivers near-perfect natural white light. Long term phosphor maintenance over product life. Exact color point conformity exceeds ANSI C78.377 standard. Provides uniform beam with no color variation over angle. Module exceeds 80 CRI (RA>80, R9>16).
  • Interchangeable OPTIKIT™ modules permit field changes to optical distribution.
  • Teflon® coated wiring, 18AWG, 600V, 250° C rated and certified to UL1659 standard.
  • Tamper-resistant, stainless steel hardware. Canopy mounting screws are additionally black oxide treated for additional corrosion resistance.
  • Surface Mount for use with side entry, surface conduits. Stainless steel mounting brackets provide for direct anchor to architectural surfaces in any orientation.
  • Round CamLock™ Canopy (Recessed Junction Box) is 5″ in diameter, machined aluminum construction. Includes stainless steel universal mounting ring for use with 4″ octagonal junction box. [2] tamper-resistant, black oxide stainless steel mounting screws. 1/8″ thick HT-805A silicone foam gasket for water-tight seal. Integral CamLock™ provides additional 30° adjustment for precision alignment of UPM regardless of junction box orientation. Integral wiper seal maintains water-tight integrity between UPM and junction box. Optional stainless steel mounting brackets may be specified to provide additional anchor to architectural surface.
  • Copper free, aluminum extrusion housing with die cast end caps. Surface mounted with flow through back channel to prevent water and debris collection. Machined aluminum cover with countersunk holes for flush hardware installation. Tamper-resistant, captive, black oxide stainless steel mounting screws. Front access for ease of installation and inspection. [2] 1/2″ NPT female conduit entries per end cap for through wiring.
  • Stainless steel installation tether cable with integral loop allows cover to temporarily suspend from housing during installation to simplify wire connection and component attachment.
  • [4] 3/4″ NPT, machined aluminum patented knockouts. High temperature, silicone ‘O’ Ring for water-tight seal. Patented design allows knockout to be reinserted without compromising seal integrity.
  • [2]700mA, Class A, constant current drivers. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.94 Power Factor, <15.0a in-rush=”” current=”” 0=”” 25a=”” input=”” 20=”” thd=”” nominal=”” at=”” 120vac=”” full=”” load=”” output=”” over-voltage=”” over-current=”” and=”” short=”” circuit=”” protection=”” with=”” auto=”” recovery=”” emc:=”” fcc47cfr=”” part=”” 15=”” class=”” b=”” compliant=”” li=””>
  • Dimming drivers for use with standard incandescent dimmers. 10-100% range.
  • StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating. Finish to match fixture.
  • 5 year limited warranty.
  • Olympus™ is ITL tested to IESNA LM-79. Lighting Facts Registration per USDOE (www.lightingfacts.com). ETL Listed to ANSI/UL Standard 1598 and certified to CAN/CSA Standard C22.2 No. 250. RoHs compliant. Suitable for indoor or outdoor use. Suitable for use in wet locations. IP66 Rated. Made in USA.
  • PM3 is NEMA 4X / IP-66 Rated Enclosure. ETL Listed to ANSI/UL Standard 50/50E and certified to CAN/CSA Standard C22.2 No. 94.1/94.2. RoHs compliant. Made in USA.