Product Description

  • Manufactured using renewable solar energy, produced onsite. Returnable to manufacturer at end of life to ensure cradleto-cradle handling.
  • Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consultwww.bklighting.com/greensource for program requirements.
  • Materials Furnished in Copper-Free Aluminum (Type 6061-T6). Unibody design provides enclosed, water-proof wireway and integral heat sink for maximum component life.
  • High temperature, silicone ‘O’ Ring provides water-tight seal.
  • Cap Fully machined. Accommodates [2] lens or louver media.
  • Choose from 45° cutoff (‘A’ or ‘D’), 1” deep bezel with 90° cutoff (‘B’ or ‘E’) or flush lens (‘C’) cap styles. ‘A’ and ‘B’ caps include weep-hole for water and debris drainage. ‘D’ and ‘E’ caps exclude weep-hole and are for interior use only.
  • Lens Shock resistant, tempered, glass lens is factory adhered to fixture cap and provides hermetically sealed optical compartment.
  • Integrated solid state system with ‘x’ technology is scalable for field upgrade.
  • Modular design with electrical quick disconnects permit field maintenance.
  • LM-80 certified. Minimum 50,000 hour rated life at 70% of initial lumens (L70).
  • BKSSL technology provides long life, significant energy reduction and exceptional thermal management.
  • Color Management Corrected cold phosphor technology delivers near-perfect natural white light. Long term phosphor maintenance over product life. Exact color point conformity exceeds ANSI C78.377 standard. Provides uniform beam with no color variation over angle. Module exceeds 80 CRI (RA>80, R9>16).
  • Installation 5” dia., machined canopy with stainless steel universal mounting ring permits mounting to 4’’ octagonal junction box (by others).
  • For use with remote LED driver. See remote driver submittal to determine remote distance and wiring requirements prior to detailing field installation of any remote wiring. Optional dimming driver for use with standard incandescent dimmers. 10-100% range.
  • Interchangeable OPTIKIT™ modules permit field changes to optical distribution.
  • Wiring Teflon® coated, 18AWG, 600V, 250° C rated and certified to UL 1659 standard.
  • Hardware Tamper-resistant, stainless steel hardware. Canopy mounting screws are additionally black oxide treated for additional corrosion resistance.
  • Exclusive StarGuard® corrosion protection.
  • RoHs compliant.
  • 5 year limited warranty.
  • Certification and Listing ITL tested to IESNA LM-79.
  • ETL Listed to ANSI/UL Standard 1598 and Certified to CAN/CSA Standard C22.2 No. 250.
  • Suitable for indoor or outdoor use.
  • Suitable for use in wet locations.
  • IP66 Rated.
  • Made in USA.