Product Description

  • Manufactured within GreenSource Initiative™guidelines.
  • Metal and packaging components are made from recycled materials.
  • Manufactured using renewable solar energy, produced on site.
  • Returnable to manufacturer at end of life to ensure cradle-to-cradle handling. Use of this product may qualify for GreenSource efficacy and recycling rebate(s). Consult www.bklighting.com/greensource for program requirements.
  • Corrosion-free composite housing, made from high strength, thermo-formed, sheet molded polyester compound. Glass reinforced, flame retardant and UV stabilized. (2) bottom-entry, 3/4″ NPT female conduit entries with knockout plugs and (4) side flats for 1/2″ or 3/4″ conduit adapters.
  • Patented corrosion-free composite Stability Flange projects into installation sub-strate to reinforce housing stability. Integral REBAR saddles simplify installation onto concrete form. (4) Orthogonal bosses permit use of 1/2″ PCV conduit or EMT to simplify vertical position and leveling of housing. Preset self-tapping screws anchor housing at proper elevation.
  • Dual axis OptiLock® stainless steel aiming bracket rotates 360° and provides vertical adjustment up to 15° from nadir. Positive lock action ensures optical orientation.
  • Modular design with electrical quick disconnects permit field maintenance.
  • LM-80 certified. Minimum 50,000 hour rated life at 70% of initial lumens (L70). BKSSL technology provides long life, significant energy reduction and exceptional thermal management.
  • A dynamically controlled, close tolerance, color tuning module replicates a continuous wide spectrum of natural light. This proprietary system provides illumination that can be tuned continuously from 2700K through 6000K and dimmed from 100-5% output. Full saturation and hue control allows for absolute color point uniformity around any color point, all while maintaining an exceptionally high CRI.
  • A wireless light commissioning tool scans a wireless network to discover the luminaires in range and then enables individual control of on/off, dimming, CCT modulation, as well as full saturation and hue control.
  • For fixture-to-fixture accuracy, a unique copy/paste function allows the settings to be copy/pasted using a hand-held remote control.
  • Interchangeable OPTIKIT™ modules permit field changes to optical distribution.
  • For direct burial in soil or concrete. Consult Drainage Installation Guide for In-Grade Fixtures (DIG-IT) for compliance with proper soil preparation and drainage requirements prior to installation.
  • For use with [1] 700mA, Class A, constant current driver. 120-277VAC (nominal) primary input voltage. 50/60Hz. >0.90 Power Factor, <15.0a in-rush=”” current=”” 20=”” thd=”” nominal=”” at=”” 120vac=”” full=”” load=”” output=”” overvoltage=”” over-current=”” and=”” short=”” circuit=”” protection=”” with=”” auto=”” recovery=”” emc:=”” fcc47cfr=”” part=”” 15=”” class=”” b=”” compliant=”” li=””>
  • Teflon® coated wire, 18 gauge, 600V, 250°C rated and certified to UL1659 standard. Features OptiLock® and gear tray quick disconnects.
  • Patented HydroLock® with anti-siphon valve (ASV™) wireway. (3) Water-Tight connectors supplied for line connection. Maximum (2) #10 & (1) #18. Minimum (1) #12 & (1) #18.
  • Self Evacuating Airtight Lamp Module (S.E.A.L.™). IP-68 rated, vacuum sealed enclosure. Patented Anti-Condensation Valve (ACV™) eliminates condensation from optical chamber. High temperature silicone ‘O’ Ring at faceplate. Patented HydroLock® technology provides fail safe water barrier between junction box and interior components.
  • Anti-siphon valve (ASV™) prevents “wicking” through conductor insulation.
  • High heat, shock resistant, tempered 1/4″ borosilicate flat glass lens.
  • Suitable for walk-over and drive-over applications to 35,000 lbs.
  • Solid, 1/2″ machined 6061T6 aluminum with (5) black oxide, captive, stainless steel mounting screws. Faceplate options include solid, 1/2″ machined brass and solid, 1/2″ machined stainless steel.
  • StarGuard®, our exclusive RoHs compliant, 15 stage chromate-free process cleans and conversion coats aluminum components prior to application of Class ‘A’ TGIC polyester powder coating. Brass components are available in powder coat or handcrafted metal finish.
  • Stainless steel components are available in handcrafted metal finish. (Brushed finish for interior use only).
  • ETL Listed to ANSI/UL Standard 1598 and Certified to CAN/CSA Standard C22.2 No. 250. IP68 Rated.
  • Made in the USA.