IA-ML3-10, IA-ML3N-10

  • show_image_in_imgtag-4

IA-ML3-10, IA-ML3N-10

3.5” LED NON-IC Recessed down light for new construction

ML3-10 and ML3N-10 is designed to apply with IC and Non-IC type 3.5” aperture down-light. LED engine is designed to maintain 70% average lumen at 50,000hr or 3 years life installed even in the ceiling completely insulated and air sealed housing. Non-IC rated housing must be kept 3” from insulation. Equivalent light output to 35W MR16 or 13W CFL lamp. Suitable for Wet Location.

Category: Tag:

Product Description



  • Galvanized steel housing with black-painted.
  • Housing can be adjustable for ceiling thickness up to 1-1/4”

Junction Box

  • Listed for through branch circuit wiring.(Max.8 No 12 AWG 90℃ branch circuit conductors.)
  • (5)1/2″ knockouts with true pry-out slots and (4) knockouts with Romex cable clamp.
  • Ground wire provided on J-box.
  • Provided listed quick connectors for easy snap-in wires. (Optional)

Bar Hangers

  • 24” Bar Hangers provide stability and support on joists and T-Bar Grid ceilings.
  • Housing can be positioned at any point within 24″ joist span.
  • Score lines allow “toolless” shortening for 12″ joists. Bar hangers may be repositioned 90 degrees.



  • Available with baffle trims in white or black painted and haze clear reflectors. See “Trims” spec sheet for selection or ordering information


  • Precisely designed Cell-Inner-Reflector directly attached  to individual LED source provides precise beam control and reduce glare by its lower recesses.
  • Glass Lens: Textured fine surface of tempered glass providing high lumen transmission and diffusion for even illumination.

LED Engine

  • Heat sink designed by computer simulation and aluminum board for low heat operation.
  • Lumen Maintenance:  L70/50,  70% lumens/50,000 hours
  • Electrical Connection:  LED lamp module is replaceable via on-board  quick disconnect terminal (No tools required).

LED power supply driver

  • 10-100% dimmable for 120V electronic low voltage dimmer switches.
  • Driver feature power factor >.90, THD <20% and has integral thermal protection to sense over temperature or internal failure.
  • Driver installed on junction box door for easy access below ceiling.
  • Meets UL class 2, FCC47CFR class B compliant.


  • 50,000hr of lamp life.


  • cCSA-us Certificated


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.